A new flying drone uses touch to perch like a bird

1 hour ago 4

Rommie Analytics

A new flying robot uses a deft touch to attach itself securely to a branch.

Grasping onto a landing spot could allow drones to post up in certain places for long periods of time. That way, they could monitor factories, power lines and other infrastructure — or explore remote places. But roboticists have found it hard to reliably help their drones get a grip.

Many drones have relied on vision to perch. But in crowded spaces, vision can be blocked. Then the robot may fail to attach. Sometimes, even a drone’s own grippers block its view during landing. The new robot’s design overcomes that challenge by relying not on vision but instead on touch sensors.

This drone can now feel its way onto a branch or similar landing spot. And once attached, its three human-inspired fingers need no extra energy to hold on indefinitely.

Researchers described this new design August 22 in npj Robotics.

The drone feels for a branch, grips to hold on, then shuts off its motors to preserve battery life.

Learning from birds

Anton Bredenbeck is a roboticist at Delft University of Technology in the Netherlands. His team wanted to build a robot that could help study vulnerable ecosystems and their species. But to do so, the drone would need to stay in those places for a while. 

“The problem,” Bredenbeck says, “is that drones are really, really inefficient flyers.” Imagine scientists wanted to send a drone into a forest for a month. A drone couldn’t fly nonstop for that long. So Bredenbeck’s team took a different approach. “Let’s see how we can attach our flyers to the environment.”

a nuthatch, a blue feathered bird with an orange underside, perches on the bottom of a branch upside downSome birds, such as nuthatches, perch upside-down like the new drone.

Mike Powles/Stone/Getty Images

Their approach was inspired by the animal world. From a distance, birds may use vision to spot a place to perch. But touch guides the final moments of their landing.

The new drone does its own version of perching by grasping onto things and hanging below. To do this, it uses three human-inspired fingers. They’re positioned like a thumb, pointer finger and middle finger. Each has three segments of different lengths. Just as in human fingers, these segments are known as phalanges (Fah-LAN-jees). The shortest segment is at a finger’s tip. The longest attaches to the robot. This makes the grasp adaptable to different shapes.

The inside of each finger has touch sensors that surround silicone pads. When the sensors touch something, the drone knows where it should move and whether to close its fingers to grasp.

a close up photo of the drone's grippers, showing the silicone pads and the jointed appendagesThis close-up shows the new drone’s grippers that sense when they contact an object.

Delft University of Technology – Studio Oostrum

The phalanges are connected by bendable joints with springs. Those springs keep the fingers in a closed position, kind of like the springs in a clothespin or a claw hair clip. Because of the springs, once the fingers have grasped onto something, they can stay in place without using any extra energy.

But the fingers do need to be opened by a motor before the robot can grip onto a perch. So they’re each connected to and controlled by a metal cord. Those cords act like the tendons in human fingers. When the motor pulls on these artificial tendons, the joints all straighten to open the fingers.

“I was really surprised how well that worked,” Bredenbeck says. The fingers adapt to many shapes without the design being too complex. “We just have a tendon. We pull on the tendon. And the finger will comply and adapt to the target.”

Do you have a science question? We can help!

Submit your question here, and we might answer it an upcoming issue of Science News Explores

Engineering for the real world

“It’s a good example of embodied intelligence,” Cecilia Laschi says of the new drone. A roboticist, Laschi specializes in systems with soft parts. She works at the National University of Singapore and did not work on the new drone.

Embodied intelligence is how roboticists describe the design of certain robots and living creatures. This type of intelligence doesn’t come from a brain or computer exerting control. Instead, it comes from a design that adapts naturally to its environment.

So far, the Delft drone has only been tested in the lab. There, it does not have to search far for a spot to grasp and perch. The real world would likely present bigger challenges. Bredenbeck would like to see how much better a future drone might work if it could use both vision and touch.

Similar human-inspired fingers and hands have been designed before. But this drone lets them take flight. And it can reliably perch if a place is available within a few meters (yards). It also can grab onto a variety of things besides branches, including a traffic cone, a T-shaped piece of metal and a human arm. In each of 26 tests, the robot successfully grasped on in less than 70 seconds.

the Delft drone gripping the arm of one of its developersThe new bird-inspired drone hangs from the arm of Anton Bredenbeck, one of its developers.

Delft University of Technology – Studio Oostrum

Even if this drone could see, it still wouldn’t be as adaptable as a bird, points out David Lentink. Machines designed by human engineers are just not as versatile as living things, says this scientist and engineer at the University of Groningen in the Netherlands. And he would know. Back when he was at Stanford University, he, too, developed a bird-inspired grasping drone.

Engineers often avoid developing components that are too complex, too costly or too challenging, he explains. But the natural world can still inspire new ways for solving engineering problems, Lentink says. 

Indeed, this study represents an exciting direction for robotics, adds Laschi. She has noticed that new robots can be “good at running, jumping — but not as good [at] interactions with the environment. When they manipulate objects, they are not that smooth. They are not that effective,” she notes.

“Robotics is about interacting physically with things,” she says. “I think it’s what we need in robotics today.” The new drone’s design lends itself to do just that.

Read Entire Article